Servo Port
TracNav menu
-
CMUcam Table of Contents
- Overview
- Hardware
- Software
- Downloads
- Gallery
- Documentation
- FAQ
- People
- Links
- Publications
- Projects
- Troubleshooting
- Forum
The CMUcam3 has the ability to control 4 servos. This can be useful if you do not wish to use a separate servo controller. The servo port can also be used as a general purpose digital outputs.
Attachments
- servo.png (44.2 kB) -
Servo Port
, added by agr on 04/28/07 12:32:29.
